Graphite dispersed in epoxy resin used as a coating and lubricant for electronic circuit boards, bushings, plastics and ceramics.
Superior adhesion to wide variety of substrates
Flexible over wide temperature range
Excellent release properties and low coefficient of friction
High lubricity
Repeatable and controlled electrical resistance properties
Minimal pre-treatment needed
Poor surface coverage and adhesion performance
Unreliable electrical resistance
Seizure and galling of mated surfaces
Typical Properties (of wet product):
Color: black
Pigment: graphite
Binder: thermoset resins
Carrier: Acheson SB-2
Diluent: Acheson SB-2
Consistency: liquid
Viscosity: 2800 mPa s
Density: 0.98 kg/l (8.2 lb/gal)
Solids content by weight: 28%
Flash point: 7°C (45 °F)
VOC: 709 g/l (5.9 lb/gal)
Theoretical coverage: 8.4 m2/l @ 25μm (338 ft2/gal @ 1 mil)
Typical Properties (as cured):
Color: black
Sheet resistance: < 1000 ohms/sq @ 25μm (1 mil) dry film thickness
Continuous service temperature: 150°C (302°F)
Intermittent service temperature: 260°C (500°F)
Coefficient of friction: 0.114 static
Salt spray resistance: > 96 hours over zinc phosphated surface, 25 micron film thickness
Unlike other distributors, two thirds of our sales team has a science degree.
425.372.9328
Your document download should begin shortly. If not then please click the Download button below to view your document.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collected is solely used to support ChemPoint's customer service communications. Read our Privacy Notice.
Thank you for your inquiry and interest! We will respond to you shortly.
Thank you for your inquiry and interest! We will respond to you shortly.
